UVP-365 UV POWER METER FEATURE This is the standard measurement instrument to measure absolute UV vaiue. All SAN-EI’s UV light source fixtures are measured by this meter. The photo diode is used for UV intensity measurement that excells in high accuracy and repeatability. A measurement jig for the standard light guide unit that facilitates UV […]
UV Curing Systems
SLG-1001 QUARTZ SENSOR FIBER HEAD FEATURE Pure quartz fiber stands aving high UV transmission properties are used. This is the quartz sensor fiber head exclusive for the UV MONITOR SERIES excelling in flexibility and durability. The exclusive use receptacle for the light receiving inlet is also available. High heat resistant characteristics allow use of this
UVM-SB SENSOR AMPLIFIER BOX FEATURE This is the relay amplifier box for the multi-point type UV monitors. Received UV light intensity is converted to electric signal for transmission. This allows distance between the light receiving inlet and the controller to 10 meters maximum. Light weight and compact design permits installation beneath or at backside of
UVM-MP MULTI POINT MEASUREMENT TYPE FEATURE Measurement of maximum of 6 points is possible. By use of thee sensor amplifier box, distance between the light receiving inlet and the controller can be extended to 10 meters. Measurement start signals can be independently output by remote control. This is useful for the light source fixtures integrating
UVM-SP-JW mW/cm ·mJ/c㎡ MEASUREMENT TYPE FEATURE Readouts of UV intensity and cumulative luminescence count are prompted either on the front panel or via the externally connected remote signal control. The UV intensity detection segment is intended to measure a specific intensity of light signals, while the cumulative luminescence count is designed to tally a cumulative
UVM-SP SINGLE POINT MEASUREMENT TYPE FEATURE Made to light wight and compact for single point measurement. Two types are available; one with direct coupling with quartz sensor fiber to the controller and other to use the sensor amplifier box (option). SPECIFICATION MEASUREMENT INDICATION UV intensity measurement (mW/cm²) MEASUREMENT RANGE *1 10 ～ 1990mW/cm² (one unit
UVF-502S MULTI-POINT IRRADIATION AND EXPOSURE TYPE FEATURE In combination use with the uniform exposure unit, selection of uniform irradiation area in the range of 80mm200mm is possible.In combination use with the multi-point light guides, simultaneous high power irradiation of multi-points is possible. Abundant remote control functions for fully auto-matic operation are standard. Since the light
UVF-352S ULTRA HIGH POWER TYPE FEATURE This is the ultra high power unit fully utilizing the high stability and long life 350watt ultra high pressure mercury lamp. The unit is made to compact size. SAN-EI’s exclusive lamp arc monitor assures easy light axis alignment. Therefore lamp replacement time is extremely short. Abundant remote control functions
UVF-210S DUAL POINT ALTERNATING IRRADIATION TYPE FEATURE By traversing two light guide ends (right and left) by means of the high accuracy air cylinder, alternating irradiation of two independent positions is possible. The one-touch mounting type lamp dose not require troublesome light axis alignment. Lamp replacement time is extremely short. Abundant remote control functions for
UVF-205S INTELLIGENT TYPE FEATURE By use of the light guide with the quartz sensor fiber, feed-back control and monitoring of UV irradiation intensity is possible. Also setting of UV intensity and meaurement by personal computer is possible. The one-touch mounting type lamp dose not require troublesome light axis alignment. Lamp replacement time is extremely short.