AM Solar simulator
XES-100S（1-5SUN）
By replacing the AM filter, the unit supports both AM1.5G and AM0.(Specifications are shown below.)
| Optical Performance | IEC 60904-9 | Actual Value | ||
| 300–1200nm Spectral Match * | 87.5–112.5% | A+ | 91– 111% | |
| Irradiance Uniformity | ≤ 2% | A | 1.15 – 1.85% | |
| Temporal Instability of Irradiance | STI | ≤ 0.5% | A+ | 0.16 – 0.46% |
| LTI | ≤ 1% | A+ | 0.54 – 0.93% | |
| Specification | ||
| AM-dependent | ||
| Air Mass Filter | AM1.5G | AM 0 |
| Standard Irradiance (=1SUN) 280–4000nm | 5000W/m² | 6740W/m² |
| 1 SUN Available Time (This is not guaranteed value.) | ≥1000 hours | ≥600 hours |
| Common Specifications | ||
| Initial Maximum Irradiance | ≥6000W/m² | |
| Irradiance adjustment range | about 50–100% | |
| Effective Irradiated Area | □ 100mm × 100mm | |
| Working Distance | 170mm | |
| Irradiation direction | Downward/Upward/Left/Right | |
| Collimation Half Angle | 2.6 degrees（max.） | |
| Declination Angle | 5.1 degrees（max.） | |
| Lamp Model | 1600W Xenon Lamp | |
| External Irradiation Operation (shutter: Open/Close) | Contact ON/OFF (Open/Close) | |
| Input voltage | 200–240VAC 50/60Hz, 2600W (Max.) | |
| Packaging Information (This is a reference value.) | To be released | |